FRANKLIN 5" CS SERIES PRODUCT DESCRIPTION
APPLICATIONS
- Domestic water supply
- Pressure boosting
- Irrigation
- Fountains
- Septic effluent pumping
- Water distribution
APPLICATIONS
All stainless construction: All CS components in contact with the pumped fluid, including hydraulics, are made from 304 stainless steel to provide superior efficiency and performance over a wide variety of applications.
Compact close-coupled design: Suitable for most common water well applications, the CS may also be operated in fountains, cisterns, or watercourses, either vertically or horizontally.
Easy installation: The single phase version is equipped with internal capacitor and thermal motor protection, eliminating the need for a separate control panel.
Easy plug-in type wiring connections: Both the power cord and the float switch can be easily replaced in case of damage.
Sealed motor: The long-life motor is completely sealed in a water-tight stainless enclosure and is cooled by the pumped fluid.
Double mechanical seal: The internal motor electrical components are further protected by two mechanical seals lubricated by an oil chamber (FDA compliant) that prevents wear and damage from running dry.
Heavy duty motor shaft: An oversized motor shaft extends through pump and is designed to maintain alignment while handling mechanical stresses as it provides smooth transfer of power to the stages.
SPECIFICATIONS
- Capacities up to 7.5 m3/h
- Heads up to 8 Bar (80 metres)
- Maximum working pressure: 10 Bar
- Discharge size: 1.25 inches BSPP
- Maximum immersion: 20m
- Maximum solids size up to 2mm
- Class F insulation, IP68 protection
- Duty rating: Continuous either vertical or horizontal up to maximum ambient temperature of 40C
- Maximum starts per hour: 20
- Level control included
- 20 m power cable type H07RN F supplied with AU/NZ 2-3 pin plug
PERFORMANCE CURVES
- Model: 961 5000 5006
- Shipping Weight: 19kgs
- Manufactured by: Frankin Electric