SHP - Hunter ACC Decoder Controller for a 2-wire Decoder System

HUNTER ACC DECODER CONTROLLER

Real-time flow monitoring in standalone mode
Learns flow by station and automatically responds to incorrect flow

Simple two-wire decoder installation
Up to 99 stations plus the ability to have remote sensors

Up to 6 two-wire paths of up to 15,000 feet/4.5 kilometers each
Economical wiring for the largest systems

Diagnostic output LEDs and electrical current display
Displays station activity and line status at a glance

Field programmable decoders with built-in surge protection
No complicated serial numbers or extra lightning devices

Easy modular upgrade to 2-way communication with central control
Simple plug-in modules upgrade ACC to hardwire, modem, or radio control

Programmable pump/master valve assignments
Run pumps and master valves via conventional or decoder outputs

6 fully-independent programs (plus 4 custom programs)
Standard programs each have separate day cycles and 10 start times, offering total flexibility for complex landscapes

Non-volatile 100-year memory
Program data is retained during power outages, no battery required

Multiple sensor hookups
Works with Hunter Solar Sync sensor for automatic smart weather adjustment and up to 4 (four) Clik sensors for rain, freeze and wind shutdowns

SPECIFICATIONS & FEATURES
• Transformer Input: 120/230VAC, 50/60 Hz, 2A max at 120V, 1A max at 230V.
• Transformer output: 24VAC, 4A, @ 120VAC
• Decoder Line (path) output: 34V peak-to-peak
• Decoder Power draw: 40 mA per active output
• Solenoid capacity: 2 standard 24 VAC Hunter solenoids per output within 100 ft./33 m runs, up to 14 solenoids max simultaneous (includes dual P/MV outputs)
• Wiring, Decoder to solenoid: standard pair 18 AWG/1 mm to 100 ft./33 m (twisted improves surge resistance)
• 6 two-wire output paths to field decoders
• Two-way confirmation of decoder activation
• Two-way monitoring of sensor connections (ICD-SEN)
• Diagnostic LEDs with line status, signal activity, decoder and status
• Programmable decoder station IDs (from controller panel)

ACC-99D Decoder Systems include all standard features of the ACC controller, including:
• 6 automatic programs, with 4 custom manual (auxiliary) programs
• Dual pump/master valve outputs programmable by station
• 1 flow meter (diagnostics to station level) and up to 4 sensor inputs (programmable to program level)
• Programmable overlap or SmartStack by program with simultaneous station groups.
• Seasonal adjust, 0 to 300% in 1% increments by program
• Flow learning mode by station with programmable alarm thresholds
• Station run times up to 6 hours with programmable delay between stations (up to 4 hours)
• Self-diagnostic circuit breaker skips shorted stations and continues watering
• SmartPort® equipped for wireless remote control
• Test program feature allows for quick system checks
• IMMS 2.0 central system compatible
• Upgrade to "smart" weather based watering with Solar Sync Sensor
• Real-time Flow Monitoring capability built in, with actual flow histories (in GPM or metric) available when connected to Hunter HFS or other compatible flow meters.
• Flow-learning mode by station, with station-level diagnostics and alarm shutdowns.
• Easy Retrieve™ backup feature can restore schedules, run times, names and other settings to a saved setup

DIMENSIONS
• ACC-99D Cabinet : 12 3⁄8" H x 15 1/2" W x 6 7/16" D (31.4 cm H x 39.4 cm W x 16.4 cm D)
• ACC-99D Metal Pedestal: 36 1⁄8" H x 15 1/2" W x 5" D (91.5 cm H x 39.4 cm W x 12.7 cm D)
• ACC-99D Plastic Pedestal: 38 3⁄8" H x 21 9⁄16" W x 15 7⁄8" D (97.5 cm H x 54.6 cm W x 40.3 cm D)
• Decoders:
ICD-100, 200, ICD-SEN - 3 5⁄8" H* x 1 1/2" W x 1/2" D (92 mm H* x 38 mm W x 12.7 mm D)
ICD-400, 600 - 3 5⁄8" H* x 1 3/4" W x 1 1/2" D (92 mm H* x 46 mm W x 38 mm D)
• Wire leads (all) - 18" L, 18 AWG dia. (46 cm L, 1 mm dia.)
*Not including wire leads.