Hunter Flow-Clik

BROCHURE OWNERS MANUAL

HUNTER FLOW-CLIK:

When Ruptures or Leaks Occur, Flow-Clik Ensures Water Flow Is Stopped Immediately

A ruptured pipe or broken sprinkler left undetected can result in substantial damage. Plants and ground cover can be flooded, slopes can be eroded, and hundreds of gallons of water can be wasted. Hunter created the Flow-Clik flow sensor to guard against these damages in the event of a rupture. The Flow-Clik can be programmed at a specified level of flow. It will shut down irrigation if it detects a flow rate higher than the programmed limit. Therefore, the amount of water loss and system damage is substantially reduced in the event of high external leakage.

Features

• Automatically shuts down system if an overflow condition occurs
• Calibration for precise system control: Single button allows each system to be programmed at a specified flow level
• Multi-color LED provides system status to display when power is applied, and indicate if flow is within limits
• Protects against flood damage and erosion
• Works with all Hunter and most non-Hunter controllers
• Compatible with most commercial and residential piping systems: Large flow range provides complete flexibility
• Warranty period: 5 years

Specifications

• Flow-Clik Interface Panel 36" leads provided for easy wiring to controller (2 wires to controller 24 VAC terminals and 2 wires to sensor)
• Current draw: 24 VAC, 0.025 A
• Switching current: 2 A maximum
• Max. distance between interface panel and sensor: 1000 ft. (18AWG minimum wire size); 2 wires required for Flow-Clik sensor.
• Programmable start up delay: 0 to 300 seconds
• Programmable interrupt period: 2 to 60 minutes
• System status indicator light
• One button system calibration to set highest flow zone